With AI data centers, 5G transport, enterprise private lines and cross-region interconnect expanding, many network builders and carriers face the same reality: fiber is running out, but laying new fiber costs too much.
Wavelength Division Multiplexing (WDM) solves exactly this. Without adding fiber, it multiplexes many wavelengths onto a single fiber and multiplies capacity. For metro, backbone and DCI projects, choosing CWDM or DWDM directly shapes link budget, scaling headroom and total cost.
What is WDM?
Think of WDM as turning a single-lane road into a multi-lane highway: a mux merges different wavelengths onto one fiber at the near end, and a demux separates them at the far end. Each wavelength carries an independent service channel.
By spacing and density, WDM splits into CWDM (coarse) and DWDM (dense). CWDM uses 20nm spacing with fewer channels - simple and cheap. DWDM packs channels far more tightly for high-capacity, long-haul transport.
CWDM typically works from 1270nm to 1610nm with wide channel spacing, so laser precision requirements (and cost) stay low. DWDM lives in the C-band and L-band low-loss windows and pairs with amplifiers, ROADM and coherent optics for far more capacity and reach.
Metro and access: cost and speed first
For metro aggregation, campus networks, enterprise lines and 5G fronthaul, the usual priorities are tight fiber, fast service turn-up, limited budget and distances within CWDM reach. Short links with modest channel counts on existing G.652 fiber are a natural fit for CWDM: lower device cost, no amplifiers needed, and deployment in days.
Backbone and DCI: capacity and reach first
Once distances stretch past ~80km or channel demand grows into dozens, DWDM takes over: narrow spacing yields 40/80/96 channels and more per fiber, EDFA/Raman amplification recovers the loss budget, and with coherent 100G-800G modules a single fiber can carry terabits across provinces.
Selection checklist
- Distance under ~80km, fewer than ~18 channels, budget-sensitive: CWDM.
- Longer reach, dense channels, planned growth, guaranteed SLA: DWDM (with amplification and ROADM where needed).
- DCI between data centers: DWDM with coherent pluggables is usually the most cost-effective path.
OTSLink WDM support
OTSLink provides CWDM/DWDM mux-demux, OADM, amplifiers and matched fiber interconnect products, with per-unit test reports before shipment, helping you squeeze the most out of every fiber you already own.