+86 166 2042 3014 WhatsApp: +86 166 2042 3014 [email protected] Mon–Fri, 09:00–18:00 CST
Get Quote

Coherent Transceiver Modules

Coherent Transceivers: 400ZR / OpenZR+ / 800G Long-Haul Transmission and DCI Solutions

Break through your fiber capacity bottleneck. OTSLink offers a full line of coherent pluggable modules that leverage advanced DSP silicon and QPSK/16QAM modulation to deliver ultra-long-haul transmission from metro DCI to long-haul regional backbones. Compared with conventional direct-detect solutions, they deliver more than 4x the spectral efficiency and integrate seamlessly with mainstream transport platforms.

Why Coherent? Core Pain Points and Solutions

1. When deploying long-reach optical transmission, do any of these challenges sound familiar?

2. Fiber exhaustion: legacy WDM capacity is maxed out, and re-cabling costs too much?

3. Chromatic dispersion and nonlinear impairments: high-speed signals degrade badly over long distances, driving up bit error rates?

4. Poor equipment compatibility: worried that third-party modules will not interoperate with your existing Cisco/Ciena/Infinera gear?

Our Answer:

OTSLink modules embed high-performance DSPs with soft-decision FEC (SD-FEC) that effectively compensates for chromatic dispersion and nonlinear effects. Whether you need 400ZR (the first choice for DCI) or OpenZR+ (multi-vendor interoperability), we supply industrial-grade products backed by rigorous burn-in testing to keep your links stable.

Mainstream Coherent Module Selection Guide

Standard/Form FactorRateTypical ReachCore Application Scenarios The OTSLink Edge
400ZR (QSFP-DD)400G~80-120kmData center interconnect (DCI), metro edge access Ultra-low power, plug-and-play, the de facto standard for DCI
OpenZR+100G-400G multi-rate3×120km / fartherMulti-vendor interoperability, flexible-grid metro networks Broad compatibility with adaptive multi-rate operation, no proprietary lock-in
CFP2-DCO100G-800G80-2000km+Backbone/long-haul transport, legacy OTN upgrades Onboard DSP interfaces directly to the line side, reusing existing transport systems
800ZR800G~80-120km
Next-generation AI compute cluster interconnects 800G-per-wavelength ultra-high density, a future-proof evolution path

Key Selection Points

Reach and OSNR budget: Work out the OSNR margin from link attenuation and EDFA configuration before choosing the modulation order — stepping the same module down (e.g., 16QAM to QPSK) trades line rate for longer reach.

Form factor: QSFP-DD ZR-class pluggables insert directly into switches with coherent-capable ports for the best power and cost profile; CFP2-DCO carries its own DSP and mates with legacy OTN line sides, ideal for hybrid networking with existing transport systems.

Power and thermal design: Pluggable coherent modules typically draw 14-18W, and CFP2-DCO can exceed 20W, so verify port power delivery and airflow design.

Multi-vendor interoperability: For cross-vendor networking, prefer open standards such as OpenZR+ / OpenROADM to avoid lock-in to proprietary implementations.

FEC and framing: Make sure the end-to-end FEC type (CF vs oFEC) matches the far-end equipment, otherwise the link will not come up.


Engineering Deployment and Acceptance Essentials

To bring links online with zero failures, OTSLink recommends watching the following technical details:

OSNR budget and modulation format:

Work out link attenuation and EDFA configuration first. The same module can step down its modulation order (e.g., from 16QAM to QPSK) for longer reach — sacrificing some line rate while markedly improving transmission reliability.

FEC type matching:

Always confirm that both ends use the same FEC type (CF vs oFEC) and framing. OTSLink modules support multiple FEC mode configurations, preventing link flapping caused by failed negotiation.

Power and thermal design:

Coherent modules run hot (about 14-18W for QSFP-DD, up to 20W+ for CFP2). Verify switch port power delivery and airflow design to prevent thermal throttling.

Launch power control:

On long routes with many spans, calculate the fiber launch power ceiling precisely. Excessive launch power excites fiber nonlinearities and actually degrades transmission quality.

Broad Application Scenarios

Same-city active-active data centers: high-bandwidth, low-latency interconnects between two sites using 400ZR.

Carrier metro WDM upgrades: smooth 200G/400G capacity scaling over existing fiber using OpenZR+.

High-reliability financial and government private lines: private, secure channels spanning hundreds of kilometers built on the high OSNR tolerance of coherent technology.

AI compute cluster interconnects: 800G coherent solutions provide a lossless network foundation for large-scale GPU clusters.


Start Your Testing and Validation

Not sure which module best fits your live network?

OTSLink offers free selection consulting and small-batch sample testing. We can work through your link budget calculations with you and deliver a full-link selection proposal.


All AOC & DAC High-Speed Interconnect Cables DWDM Passive Components High-Speed Optical Transceivers Coherent Transceiver Modules DCI DWDM Chassis Platforms Coherent MXP & Transponder Boards DWDM Inline Monitoring & Auxiliary Modules Optical Switching & Line Protection Units Optical Amplifiers DWDM Fiber Cabling Components
400G 640km & 200G 2000km CFP2 Coherent
Coherent 800G CFP2 DCO